This series of products is saturated polyol ester. With extreme pressure, anti-oxygen, anti-corrosion and other additives modulated into a synthetic environmental protection refrigerated oil, Suitable for refrigeration systems with R22 as refrigerant, Compressor oil types are reciprocating, screw, rotary, scroll and centrifugal refrigerator, Including freezing chamber, industrial air conditioning, heat pump, central air-conditioning, water chilling unit.
BASOILS LD Series is a synthetic ester base oil developed for the formulation of refrigeration compressor lubricants used in R22 refrigeration systems.
Available in viscosity grades from LD32 to LD320, the series provides formulators with options for different compressor designs, operating temperatures, lubrication-film requirements, and finished-oil viscosity targets. It can be used to formulate refrigeration lubricants for reciprocating, screw, rotary, scroll, and centrifugal compressors.
LD Series base oils are suitable for refrigeration and cooling equipment used in cold storage, industrial air-conditioning systems, heat pumps, central air-conditioning systems, and water chillers.
This product is a lubricant base oil rather than a finished refrigeration oil. Anti-wear, antioxidant, anti-corrosion, and other additives should be selected according to the target compressor system and finished-lubricant requirements.
| Product name | Kinematic viscosity 40℃(mm²/s) | Kinematic viscosity 100℃(mm²/s) | Viscosity index (VI) | Pour point ℃ | Flash point ℃ | Acid value mgKOH/g | Water content ppm | R22 20%℃ |
| LD32 | 32.03 | 5.60 | 114 | -57 | 234 | 0.03 | 50 | -60 |
| LD46 | 46.09 | 6.72 | 98 | -50 | 242 | 0.03 | 50 | -60 |
| LD68 | 64.86 | 7.94 | 85 | -47 | 250 | 0.03 | 50 | -60 |
| LD90 | 92.09 | 9.94 | 85 | -43 | 250 | 0.03 | 50 | -55 |
| LD100 | 105.21 | 11.49 | 96 | -43 | 258 | 0.05 | 50 | -50 |
| LD150 | 132.42 | 14.41 | 108 | -42 | 265 | 0.03 | 50 | -47 |
| LD170 | 171.54 | 17.84 | 114 | -42 | 267 | 0.03 | 50 | -40 |
| LD220 | 219.1 | 22.21 | 123 | -41 | 270 | 0.03 | 50 | -37 |
| LD320 | 306.20 | 31.12 | 139 | -41 | 274 | 0.03 | 50 | -37 |
| Grade | Typical Formulation Direction |
|---|---|
| LD32 | Lower-viscosity refrigeration lubricant formulations requiring excellent low-temperature flow |
| LD46 | Medium-low-viscosity compressor lubricant formulations |
| LD68 | General refrigeration compressor lubricant formulations requiring moderate viscosity |
| LD100 | Medium-viscosity refrigeration lubricant formulations |
| LD150 | Higher-viscosity compressor lubricant formulations requiring a stronger oil film |
| LD170 | Higher-viscosity lubrication systems with increased film-strength requirements |
| LD220 | Heavy-duty or higher-viscosity refrigeration compressor lubricant formulations |
| LD320 | High-viscosity refrigeration lubricant formulations for systems requiring thicker oil films |
| Application | Recommended Maximum Treat Rate |
|---|---|
| Synthetic Refrigeration Compressor Oil | Up to 98% |
The actual treat rate should be determined by the required finished-oil viscosity, additive package, compressor type, refrigerant concentration, oil-return requirement, and validation results.
LD Series is a saturated polyol ester base oil designed for formulating synthetic refrigeration compressor lubricants used in R22 refrigeration systems.
No. LD Series is a base-oil component. A finished refrigeration oil requires a complete formulation with suitable antioxidants, anti-wear additives, corrosion inhibitors, and other components based on the system requirements.
The available product information identifies LD Series for refrigeration lubricant formulations used with R22 refrigerant. For use with other refrigerants, compatibility and miscibility testing should be completed before commercial use.
LD Series can be evaluated for lubricants used in reciprocating, screw, rotary, scroll, and centrifugal refrigeration compressors.
Lower-viscosity grades such as LD32, LD46, and LD68 are generally selected where low-temperature fluidity is a key requirement. Higher-viscosity grades such as LD150, LD170, LD220, and LD320 can be considered where a stronger oil film or higher operating viscosity is required. Final selection should follow compressor and finished-lubricant testing.
Moisture can affect lubricant stability, system performance, corrosion control, and compatibility in refrigeration systems. Low water content is therefore an important quality-control target for refrigeration compressor oil base oils.
Yes. The product information lists heat pumps, central air-conditioning systems, water chillers, industrial air-conditioning equipment, and cold-storage systems among its intended application areas.
Synthetic freezer oil 98%(Max.)
Excellent thermal oxidation stability, Prevent lubricating oil deterioration at high temperature;
Excellent dissolution properties when mixed with R22;
Excellent low temperature performance, Very low pour point, Low temperature fluidity is excellent, Ensure system adapts to various low temperature performance;
Different operating viscosity can produce a good seal between rotors, and can be also provides good lubrication in bearings and seals;
Excellent high and low temperature performance, ensure that the oil bath evaporator has a good oil return and good heat exchange rate.
Good material adaptability, Ensure the system works properly for a long time;
Excellent comprehensive performance, Ensure the refrigeration system to work normally for a long time;
The selection of high viscosity grades gives it very superior performance in rotary compressors;
Very low volatility provides good separability with oil and gas;
Plastic drum packing, net weight 200kg per barrel.
Store and transport as non-dangerous goods in a cool, dry and ventilated place.